Our Services

Our certified Portable appliance testing specialists and Fire equipment compliance officer will carry out the following services in accordance with the relevant sections of AS/NZS 3760 & AS/NZS 3012 for electrical and OSH regulation 3.9, AS/NZS 1851 & AS/NZS 3000 for fire safety.

F A Q

Request a Quote

REQUEST

We Are Specialised In

  • Portable Electrical Equipment Test and Tag

 

 

An employer has a duty of care to provide a safe, hazard-free work environment.problems or faults with electrical equipment can cause a fire, serious injury or even death if not identified and rectified.

Not all of the faults which can arise in portable electrical appliances can be easily identified. problems such as current leakage or poor earth continuity cannot be seen during a visual inspection alone. these faults may be present but go undetected and this can present a serious hazard.

SCS Australia provides test and tag services to ensure all appliances are thoroughly tested, not only visually but electrically as well. We will provide a log of all test results and highlight any areas of concern as well as send timely reminders as to the next time the service is due. Your appliances will be fitted with the relevant tags.

By having their electrical appliances test and tagged an employer is demonstrating that they are showing their duty of care in taking the necessary precautions towards providing a safe and hazard free work environment. Not only will they be taking the steps to being legally protected in the event of an accident but they will benefit from the lower insurance premiums offered by insurance companies to those who regularly test and tag their appliances.
The test and tagging of electrical appliances are extremely important and should be performed by an expert.

SCS Australia is your trusted expert in the industry so call us today to find out more about our services or to book a visit from one of our technicians.

 

 

  • RCD (Safety Switch) Testing

    A Residual Current Device (RCD) or ‘Safety switch’ is a device which can be in a fixed location such as at the switchboard or power point. It can also be a portable device for use in various different locations.

    RCD’s are designed to detect any fault causing a disruption to the flow of electricity through a circuit. It will then quickly switch the power off to that circuit eliminating the risk of electric shock.

     

    RCD’s are designed to save lives and it is imperative that they are in good working condition in the event of an electrical incident.

     

    Safety Compliance Solutions Australia will inspect, test and tag your RCD’s in compliance with Australian standard AS/NZS3760:2010 ensuring that you and your electrical circuits and are protected.

     

  • Fire Fighting Equipment Test, Tag & Smoke Detector Inspection
     

Safety Compliance Solutions Australia offer test and tag services to Australian Standards AS/NZS1851 for the following firefighting equipment:

 

  • Fire Extinguishers
  • Fire hose reels
  • Fire Blankets

 

Statistics show that over 90% of fires in the workplace are extinguished using portable fire extinguishers. Damage to property, injury and loss of lives can be prevented by regular inspection and testing.  Fire extinguishers need to be inspected at 6 monthly intervals and may require further maintenance at 1, 3 and 5 yearly intervals. Extinguishers need to be pressure tested and refilled on a regular basis. SCS Australia will also test your smoke detectors in accordance with the Building Code of Australia (BCA)

 

  • Emergency & Exit Lighting Testing

In the event of an incident in your workplace your staff and customers will need to exit the building quickly and safely to escape a potentially dangerous environment. To ensure your emergency and exit lighting system is in good working condition it is necessary to have them tested in accordance with Australian Standard AS/NZS2293.

 

Safety Compliance Solutions Australia will test and inspect your exit and emergency lighting on a 6 monthly basis in accordance with AS/NZS2293.

 

Our fully comprehensive test and inspection service will comprise of the following:

  • Discharge test
  • Replacement of tubes and starters
  • Cleaning of diffusers

 

  • Microwave Leakage Testing

    Microwaves in the workplace and home can get a lot of use and are subject to damage or leakage. Slamming doors, dirt or food caught in door seals or hinges and general wear and tear can cause the door seal integrity to be compromised. Microwave users can be exposed to health hazards from dangerous radiation leakage.

     

    Safety Compliance Solutions Australia can give you peace of mind by testing your microwaves for the harmful and sometimes deadly radiation leakage.

 

  • Data Management & Reminder Services

    Our DATA Management System will record all the relevant information regarding the test and tagging results of your equipment and systems. We will log all inspection results and maintenance plans and provide you with timely reminders for retest schedules in accordance with AS/NZS3760:2010.

     

    Safety Compliance Solutions Australia will ensure you remain up to date in accordance with the relevant standards and regulations. Contact us today for your peace of mind.

We Are The Experts in Our Industry

We are not just another electrical safety compliance testing company. We are competitive, certified and fully qualified. If you would like to know more, please call us today on 0472 703 462